
Introduction
Picture this: you’ve got a tough industrial heating job, but space is at a premium and you need serious, concentrated heat. That’s exactly why we built the 380mm clear halogen heating lamp. It’s all about direct, targeted heat. Think of it as a laser beam of warmth, focused right where you need it—on parts, molds, or production lines. Not on the whole room. So if you need heat, fast, without turning your facility into a sauna, this lamp is your answer.
The Specs, Straight Up
Let’s talk about that 380mm length. It wasn’t an accident. We made it this size so it can slip into the tight corners of machines where longer elements just wouldn’t fit. It clears the housing and never gets in the way of your tooling. The clear quartz envelope is key, too. It lets the lamp deliver shortwave infrared, which means one thing: speed. We’re talking near-instant on-and-off response, a world away from those clunky, slow-to-heat elements.
Power, Voltage, and Why It Matters
We typically run these lamps on industrial voltage, often 400V systems. Here’s the why: higher voltage means lower current for the same wattage. And lower current brings a bunch of practical wins. You can use smaller wiring. You get less voltage drop. And the terminals stay cooler. Of course, there’s a trade-off. Higher voltage means you need proper insulation and safety measures. And you need a rock-solid power supply. A 400V, 2500W tube packs a serious punch, so you’ve got to make sure your machine’s cooling and clearances are up to the task.
The Inner Workings: Halogen, Coating, and Base
The secret sauce is the halogen cycle. It’s what keeps the lamp’s output strong and steady over its life. That cycle stops the filament from blackening the inside of the quartz envelope, which means the heat output stays consistent. No fade-out like you get with standard incandescent tubes. We kept the finish clear for a reason: maximum power delivery. Every bit of radiant energy gets through. And for the base, we went with the R7s connector. It’s a proven, industrial-grade fit for linear tubes. It handles the wattage, makes a solid connection, and locks in place. So even with machine vibration and constant cycles, it won’t come loose. Installation is a breeze, too—just slide it in, align it, and you’re good to go.
Where It Shines
This lamp was born for industrial jobs that demand focused infrared heat. Think plastic heating, curing coatings, activating adhesives, or preheating on an automated line. That instant response is a lifesaver when you’re trying to keep up with tight production cycles. And the compact size means you can add heat to specific zones without tearing your whole machine apart. You’re going to get serious, repeatable heat. But remember, these lamps run hot. So you absolutely need proper guarding, reflectors, and safe clearances. Get the setup right, and you’ve got a heat source that just works. It installs clean, runs without a hitch, and gives you one less thing to worry about.
- 380mm
- Clear
- Halogen
- Heating
- Lamps
- Industrial
- Infrared
- Heat
- Lamp
- 2000w 220v Sk15 Half White Plated Halogen Infrared Heat Lamp for Pet Bottle Blowing Machine
- 2000w 440v R7s Ir Heater Lamp Half White Halogen Infrared Heat Lamp for Pet Bottle Blowing Machine
- 350mm 220v 1500w Halogen Infrared Heat Lamp for Pet Blowing Machines Plastic Moulding